If your garage door is functioning properly at this moment, you can keep it operating that way for a very long time – as long as you have a basic inspection and maintenance routine. Here are a couple of tips to keep your garage door properly maintained and get ahead of developing issues.

Inspect the rollers and tracks on the garage door. Now is the time to clean the tracks and rollers if you can’t recall the last time you cleaned them. Be sure to brush them thoroughly and lubricate the rollers and axles. The bearings on rollers can also wear out; switch out any rollers that don’t operate properly.

Tighten the hardware. The tracks that lead the rollers on an overhead garage door are set up in sections and connected to the garage with brackets. Ensure the sections are well-secured, and the screws and bolts that clasp the brackets are firm.

Check the cables and pulleys. Spring-operated garage doors have cables and pulleys that might wear out over time. Frayed cables and damaged pulleys have to be switched out by a professional.

A garage door should demand only a small amount of pressure to push it up and down. If springs wear out and lose their resiliency, a power garage door opener might have to work very hard to lift the door. This can cause the motor on the opener to wear out quickly. A qualified technician should substitute worn-out springs.

Check the auto-reverse function on the door opener. Garage door openers are designed to immediately reverse and lift the door if it runs across a hurdle on the way down to the floor. If this function no longer functions correctly, the heavy door can present severe hazards and lead to accidents. See to it to have the door opener dealt with or switched out.

Still can’t get the proper repair for your problem? Call a trusted garage door installer and technician to take the hassle out of fixing your garage door.

Noisy Garage Door

Loud garage doors can be a nuisance, especially for those who have to sleep above or beside the garage. Luckily, the majority of noisy garage doors can be addressed with a combination of standard maintenance and parts replacement.

If the standard maintenance tips above still can’t quiet your noisy garage door, it’s possible that the door’s hinges have to be changed. The rollers that run in the metal tracks can also wear down in time and make noise when their bearings stop rolling smoothly.


Frozen Garage Door

On the chilliest days of the year, you’re sure to need and cherish the convenience of opening and closing your garage door immediately. Unfortunately, that’s exactly when handling your garage door can be the most problematic, because of the moisture and cold.

Garage doors can and do freeze down to the garage floor. This may be repaired by hitting the opener button, which crushes the ice that connects the two areas.

If the door refuses to move on the first try, resist the impulse to keep banging on the automatic opener button. This is most likely to create a more harmful problem with the garage door opener, including, but not limited to, stripped gears, damaged springs, and a burned-out motor on the opener.

Instead, try other approaches that may break the icy connection between the door and the floor. For instance, you can use a heat gun or hair dryer to thaw the ice and release the door. Common de-icing products can also get the job done.

If you take care not to ruin the door or the seal on the bottom of the door, you can also take a flat shovel or similar item to chip away at the ice.

Clear away any water, ice, or snow from the floor below the garage door once you get the door open. Keeping this spot dry will prevent future freezing.

More garage door chicago il content here.